Skip to content




This guide will walk you through how to setup your campaigns with Mobyoung using Branch Universal Ads and track ad conversions across every device, platform, and channel.

Branch Universal Ads provides everything you need for complete tracking.

The basic integration involves three parts:

  1. Integrating the SDKs and tracking in-app events
  2. Enabling the integration and selecting postbacks
  3. Creating tracking link


Integrating the SDKs and tracking in-app events

The Branch SDKs for iOS and Android allow you to get up and running quickly.

If you haven't already integrated Branch SDK into your application, please follow our integration guide to integrate Branch SDK into your application:

  1. Documentation for Android

  2. Documentation for iOS

Limitations with setDebug and seeing data in Branch

When integrating the SDKs, it's often useful to use setDebug to verify that your app is able to communicate with Branch servers, and is receiving deep link data. However, our upstream systems don't register test events sent using setDebug, so events will not appear in Liveview or Analytics, nor will they fire postbacks. You should disable setDebug when looking at Liveview or testing postbacks.

Track conversion events

Install and open events are automatically tracked using just the Branch SDK integration. However, to track custom events, such as registration or purchase, you will need to integrate them into your application.

Sending event metadata from your application

Please make sure that you setup and pass event metadata from the application to the ad partner. Follow up with your ad partner to get the list of required parameters.

Please reference the general V2 Event Tracking Guide. This will help ensure that you've integrated the right Branch events with the correct metadata.

Testing your events with Liveview

You can test your integration by going to our Liveview page. Set a filter with the event name to verify that the Branch SDK is recording each event

Enable the integration

  1. Visit the Ads page on the Branch dashboard.
  2. Select Partner Management from the sidebar.
  3. Search for your Universal Ads Partner


Provide account credentials

Enter any credentials that may be required, and click Save and Enable in the bottom right hand corner.

Account credentials

Please ask your ad partner where you can find your credentilas.

Enable postbacks

Basic postbacks will automatically be activated for events like Install and Purchase when you enable your ad partner. You can then add additional postbacks, for example, if you wanted to add postbacks for custom events that are specific to your app like Account Created. You can also edit postbacks if there's additional data you really need to pass along to your ad partner.


Once you've enabled an integration it's time to create a tracking link.

  1. First, select an ad format. For App Install or App Engagement campaigns you'll want to select the App Only format. For Search or Display campaigns where the user should go to web if they don't have the app, then you should select Cross-Platform Search or Cross-Platform Display. Product Links are for shopping or dynamic remarketing campaigns and will take you to create a Deep Linked Product Feed.


  2. At this point you need to name your link. Select something that will make it easy to find if you need it later. Your Ad Format and Ad Partner should be selected already, but feel free to choose one if they aren't. It's important that you select the right Ad Partner for analytics later on. Click Configure Options to continue.


  3. This is your chance to add deep link data and analytics tags. Analytics tags are important for later segmentation, so click the Analytics sub tab to add a Channel and Campaign value.


    Set Analytics tags

    It's easier to slice your data in our analytics platform if you properly assign analytics parameters to your link. Channels generally correspond to ad networks, and Campaigns correspond to marketing initiatives that you're launching. For example: Channel: "YouTube", Campaign: "Summer 2017 Shoe Discounts."

  4. Click Create Link Now, and you have your tracking link! Take this link and give it to your Ad Partner's Account Manager or paste it into the tracking section of your campaign yourself.


    Server to server tracking links

    If you just need a server to server tracking link just add %24s2s=true at the end of your link, so we know it's a server to server link.

View Your Data

The Ads Analytics Page on the Branch dashboard provides an interactive time series graph and table to view the performance of your Ad campaigns.

Example Ads Analytics Graph

The table shows summary data on the performance of each Ad campaign. On the right top side of the table you can find a download button to retrieve the chart's content as a CSV file.

Example Ads Table

Interacting with your data

Breakdown and compare aspects of your Ad campaigns' performance by using the Compare by + button to add a parameter to split the data displayed data by.

Then use the and + button to refine the data displayed to gain deeper insight into the performance of your Ad campaigns.

View your data with People-Based Attribution

The Ads Analytics Page on the Branch dashboard shows the performance of your ad campaigns across both web and app. You can view performance over time, including purchase and other custom events.

Events are attributed using Branch's unified last-click attribution model. This means that Branch will attribute to the last click across channels, and across platforms.

For example, if a customer clicks a Branch email link, and then clicks an ad, installs the the app and purchases an item, Branch will attribute the install and the purchase to the last clicked ad link.

If the customer then goes on to purchase an item on web within the attribution window, Branch will also attribute the web purchase to the same ad link, connecting the web and app actions taken by a single user for a more accurate view of your marketing channels and customer behavior.


You can read more about People-Based Attribution here

View-Through Attribution (VTA) with Impression Pixels

View-through attribution allows you to track installs, session starts and conversion events back to an ad impression, even if the ad was never clicked on.

Our view-through attribution logic is currently as follows for any given event:

  • If there's a click within a valid attribution window, give credit to the click.
  • If there's no click within a valid attribution window, give credit to the last impression that was within a valid attribution window.

Currently, view through attribution is supported for Self Attributing Networks (SANs), such as Facebook and Google, and non-SAN networks with server to server impression link support. To create a impression tracking link for non-SAN networks, simply create an ad link, and grab the impression link from the final step of link creation. SAN networks support VTA without any additional links.

Impression Link Formatting for VTA

For view through attribution, make sure the impression pixel returned by Branch's dashboard has %24s2s=true and an %24idfa or %24aaid macro. If you just want to count impressions, without attribution, these macros are not needed. Questions? Contact


Add more postbacks

  1. Click the Add New Postback button at the bottom of the screen.

  2. A modal will appear with Branch default events, as well as any commerce or custom events you've set up. Select an event, enter a postback URL if you're asked to, and click Save. This will be the event that triggers your new postback.


Send All/Attributed events

If you want to send All Events, not only events attributed to the partner - you can change this setting using the toggle at the top of the screen.


Whitelist postback server IP addresses

If you need to whitelist the postback server IP addresses for security purposes, they are listed below:


Edit postbacks

For advanced integrations, you may want to provide additional information in your postback that isn't there by default. You can edit postbacks by following our postback templating instructions, then clicking save. The postbacks in the Universal Ads interface follow the same syntax as Webhooks in Data Feeds. When the postback is saved, it is then validated - if you enter an invalid postback, you'll get an error at the top of your screen.

Reset Postbacks

We all make mistakes from time to time. If you need to reset your postbacks and your credentials, navigate to the Account Settings tab and look for the Reset all settings button. Be careful though! This will disable the ad partner, clear out all credentials and postbacks that you've set up, and return the ad partner to its basic configuration. You can then start afresh

Branch Tracking links allow tracking many parameters about the performance of your ad campaigns and individual ads. Additional parameters for advanced analysis may be added to the link after the '?' or '&' character, to trace extra information.

The following parameters are available to use within the pre-generated tracking link:

Campaign Information

Branch Parameter Description
~agency Agency name
~secondary_publisher Sub Publisher
~campaign Campaign name
~campaign_id Campaign ID
~channel Channel
~feature Feature
~stage Stage
~tags Tags
~creative_name Creative name
~creative_id Creative ID
~ad_set_name Ad set name
~ad_set_id Ad set ID
~ad_name Ad unit name
~ad_id Ad unit ID
~banner_dimensions Banner Dimension
~placement Placement
~keyword_id Keyword ID

Device Information

Branch Parameter Description
%24aaid Google AAID
%24idfa Apple IDFA

Spend Calculation

Branch Parameter Description
~cost_model Cost Model
~cost_value Cost Value
~cost_currency Cost Currency

Tracking link with additional parameters

Here is the example how to pass Agency and Sub Publisher with Tracking link:

Change attribution windows

Attribution windows can be specified at the global account level or on a per link basis with the link level window taking priority. See the below instructions for setup.

For customer experience and data accuracy, please do not set your deep linking window longer than the other attribution windows.

Account Level Attribution Windows

You can edit your attribution windows under Link Settings > Attribution Windows.


Learn more about account level attribution windows in People-Based Attribution.

Ad Network Attribution Windows

You can edit your attribution windows at the ad network level, if your ad network requires it. This is recommended when you enable networks like Facebook and Google, who may have different windows for installs. With this, you can preserve your Account Level Attribution Windows, as well.


To set attribution windows on a link level, you can append the following parameters to your generated Branch link.

Key Example Link

Link Level Attribution Support for Standard Branch links

As of July 2017, link level attribution window setting is only available on standard Branch links. Special Branch links such as the ones used for Google's Universal App Campaign or Play Store links with Branch link id parameters are currently not supported.

Reset Settings

  1. Click the Reset All Settings button at the right top of the Account Settings tab..


  2. A confirmation modal will appear, just click Yes, Reset Ad Partner to conform the Reset.



How do I debug a discrepancy?

Navigate to the Analytics page to see data.